ATech Machine ZETA-02 A Manual do Utilizador descarregar pdf (Página 17)

Operating and Safety Instructions

NOTE: ENSURE THAT THE SAW BLADES ROTATE IN CORRECT DIRECTION (THE

CORRECT DIRECTION HAS BEEN MARKED ON THE MACHINE'S UPPER COVER)

8.4. MAINTENANCE AT THE END OF THE WORKING DAY

8.4.1. Disconnect the electric and power supply. (Main Switch in “0” position)

8.4.2. Remove all burr and foreign materials from the machine. If it is necessary

to clean the inside of the protection cover, lift and clean it wearing

protective gloves because of the cutters. Use protective eye glasses.

8.4.3. If you have used water or water based liquids during drilling operations,

dry the machine with a dry cloth after the operation is finished.

8.4.4. If the machine will not be used for a long time, lubricate the unpainted

sections of the machine as protection against corrosion.

8.4.5. Avoid damage to the paint when cleaning the machine.

8.4.6. Apply protective machine oil onto both surfaces of the milling cutters as

protection against corrosion.

9. INFORMATION ABOUT FAULTY USE

9.1. Check the plug for power supply.

9.2. Ensure that the rotation direction of the milling cutters is correct. (the correct

direction is marked on the upper cover).

9.3. Don’t use too high cutting speeds. Adjust the cutting speed with the reducer

valve

9.4. Never operate the machine with the protection covers open.

1 2 ... 12 13 14 15 16 17

Sem comentários

ATech Machine ZETA-02 A Manual do Utilizador Página 17